Morse B200-B500 Clutches

The B200/B500 Series Clutches share the same design. A full complement of cams is retained in an outer race requiring a bearing supported hardened shaft as the inner race. It is primarily used for back stopping applications, although it can also be used for indexing and overrunning applications as well.

The B200 series has the same outside diameter as a metric 200 series ball bearing making it easy to facilitate assembly adjacent to the ball bearing. The B500 series was created as a replacement backstop for many different gear reducers. It comes in many different diameters and generally has a larger cam than the B200 series clutch. Both series come pre-lubricated with special light grease. In service they can be lubricated with either grease or oil.

Specifications Features & Benefits Industries Downloads
  • Bore Range: 0.650" - 2.209"
  • Torque Range: 39-575 lb-ft
  • Hardness: RC 58-62
  • Case Depth: 0.050 – 0.060 after grinding
  • Shaft Concentricity: < 0.002

View specifications

  • Bore Range: 0.650” – 2.04”
  • Torque Range: 60-1,250 lb-ft
  • Hardness: RC 58-60
  • Case depth: 0.050 - 0.060
  • Shaft finish: 16 micro inches

View specifications

Morse Homepage