Water and Wastewater

A clean water supply and effective wastewater treatment are fundamental to public health. But when dealing with electrical systems and equipment, water is the enemy. Add in the problems of caustic and hazardous gases, and it’s clear why so many water and wastewater treatment facilities rely on EGS Electrical Group for the safest, most durable and corrosion-resistant products.

Nelson Heat Trace offers a complete range of products and expertise for the powering, controlling and monitoring of pipeline temperatures. Our tailored, trouble-free, efficient and cost-effective systems are used around the globe, from frozen tundras to arid deserts.

Code•Master and Mercmaster luminaires provide a huge selection of lighting solutions for any area or task, with HID, fluorescent and next-generation LED models designed to withstand corrosive atmospheres, wet conditions and extremes of temperature. Many explosionproof and dust-ignitionproof models are available for use in classified hazardous locations.

The Edco SLAC surge suppressor is specifically designed to protect electronic instruments used by the water/wastewater industries. It combines hybrid AC power protection and signal line protection in a corrosion-resistant NEMA 4X polycarbonate case. The Edco SS Series also offers NEMA 4X protection in a coordinated multi-stage surge suppression system that integrates the fast response time of silicon avalanche diode technology with the high energy capability of metal oxide varistor technology.

Unicode® 2 Series control stations and switches are available in 316L stainless steel, aluminum and nonmetallic versions to provide superior corrosion resistance. A wide selection of push buttons, actuators, pilot lights, contact blocks, switches and ammeters are available, along with factory sealed, pre-drilled and customized enclosure options.

EGS Electrical Group also offers a complete range of tray cable fittings, conduit bodies, fittings, cast junction boxes and other products designed for durability in harsh and hazardous environments.

	SLAC Series Combined AC Power and Data Signal Surge Protection SolaHD SLAC is designed to protect electronic instruments by combining hybrid AC power protection and signal line protection. They are manufactured to protect electronic instruments in the demanding water and wastewater industries

	SS Series Low-Voltage Signal Line Surge Protection SolaHD SS64 and SS65 are designed for the water and wastewater industry to address over-voltage transients with gas tube and silicon avalanche technology. Sneak and fault currents are mitigated with PTC devices

	Code-Master 2 HID Factory Sealed Luminaires Appleton’s Code-Master 2 HID factory sealed luminaires are ideal for use in areas where ignitable vapors, dust, moisture and corrosive elements may be present, suitable for use in wet locations

	AE Series Bolted Circuit Breakers and Enclosures Appleton's AE Series bolted circuit breakers and enclosures have overload and short circuit protection, control of lighting and power circuits and are suitable for use in chemical, petrochemical plants and other process facilities

	EB Series Circuit Breakers and Enclosures Appleton's EB Series circuit breakers and enclosures provide explosionproof, over current and short circuit protection as well as safe disconnect

	PowerPlex Factory Sealed Enclosed Circuit Breakers Appleton's PowerPlex factory sealed enclosed circuit breakers are suitable for use in indoor or outdoor classified locations, including chemical and petrochemical plants, petroleum refineries, other process facilities and industrial applications

	AE Series Disconnect Switches Appleton AE Series disconnect switches provide overload and short circuit protection and load disconnect for motor application or individual motor control switch

	AJBEW Cast Junction Boxes AJBEW cast junction boxes are explosionproof and used where hazardous materials are handled or stored

	ATX JBES Series Pre-Drilled 316L Stainless Steel Junction Boxes Appleton's ATX JBES Series 316L stainless steel enclosures are factory drilled, equipped with terminals and designed for use in Zone 1 or 2 areas where flammable gases or vapors are present

	SJB Series 316L Stainless Steel Junction Boxes Appleton’s ATX Series SJB 316L Stainless Steel Junction Boxes, Designed for use in Class I, Zone 1 areas, where flammable gases or vapors are present either continuously or intermittently

	MPS Multi-Plug System Nelson Firestop MPS multi-plug system is a fire rated, environmental cable sealing system with molded Tecron rubber plugs for use in pipe sleeves or cast round openings. provides protection from fire, smoke, water and blast pressures

	Grip-Tite Strain Relief Connectors O-Z Gedney Grip-Tite strain relief connectors are used to secure and protect the cord or cable from pullout

	A2F Series Nickel Plated Brass Cable Glands Appleton’s A2F nickel plated brass cable glands are designed for use with unarmored cable. They are certified for use with enclosures

	C2KX Marine Cable Connector Appleton’s C2KX marine cable connector is designed for use with wire braid armor and jacketed cables. They are suitable for ordinary and wet locations. Provides mechanical retention and electrical continuity via a removable armor termination

	PX Series Nickel Plated Brass Cable Glands for Unarmored Cables Appleton’s ATX PX Series nickel plated brass cable glands are designed for use with all types of unarmored cables

	PX2K Series Nickel Plated Brass Cable Glands Appleton’s PX2K Series nickel plated brass cable glands are for use on all types of armored cable such as braid, tape, wire and lead sheath versions

	T3 Series Nickel Plated Brass Cable Glands Appleton’s T3 Series nickel plated brass cable glands are designed for use with for armored cables

	ELBY and ELBD 90 Degree Pulling Elbows Appleton ELBY and ELBD 90° degree pulling elbows serve as pulling fitting, makes 90 degree bend in conduit runs

	FM7 Unilet Conduit Outlet Bodies Appleton FM7 Unilet conduit outlet bodies serve as pulling fittings, make bends in conduit system, provide openings for splicing, connect and change direction of conduit runs, allow connections for branch runs, permit access to conductors for maintenance

	NEC 6x8x Series C, LB, UB and LL, LR, T Mogul Unilet Conduit Outlet Bodies Appleton NEC 6x8x Series C, LB, UB and LL, LR, T Mogul Unilet conduit outlet bodies are designed for pulling straight, 45 degree or 90 degree angle turns, and or making taps and splices

	NTCM3 Pull Box Nutsteel NECM3 weatherproof pull boxes are supplied with a a 1/2" diameter (NPT) breather – drain and are available in a variety of sizes

RSS News Feeds

Please Select

CONSIDER IT SOLVED.