Chemicals

The chemical industry converts raw materials into tens of thousands of products that define the character of contemporary life. From basic to specialty chemicals, it is a hugely diverse industry that depends on an equally diverse selection of electrical products to ensure safe and reliable operation in potentially hazardous and corrosive environments.

Mercmaster™ III HID luminaires and low profile compact fluorescent luminaires supply rugged, dependable lighting from individual task areas to production facilities and warehouses. The new Mercmaster LED series offers next-generation efficiency and lighting control.

SolaHD hazardous location transformers provide power for plant automation systems using a corrosion resistant encapsulated design. They are available in a range of single and three phase units from 0.05 to 45 kVA, and with options including stainless steel enclosures, NEMA 4X rating, low temperature rise designs and more.

For power distribution, D2P circuit breaker panelboards offer control and protection of lighting, heat tracing and other circuits using an explosionproof, factory sealed breaker design and corrosion-resistant housing. SJB Series junction boxes and JBES Series pre-drilled boxes enclose and protect electrical devices in hazardous locations and feature 316L stainless steel construction for excellent corrosion resistance especially against chlorides. The JBEP Series and PJB Series of junction boxes and enclosures use nonmetallic construction for the highest degree of corrosion protection in hazardous locations.

The EFD Series offers an extensive choice of factory sealed control stations and pilot lights for use in hazardous locations, including models suitable for Group B gases. Powertite® plugs work with EBR interlocking receptacles to provide explosionproof protection for stationary and portable equipment used in Class I, Division 1 hazardous locations.

EGS Electrical Group also offers tray cable fittings, conduit bodies and fittings, cast junction boxes and other products designed for durability in harsh and hazardous environments. These are just a few of the products EGS offers that are ideally suited to the specialized requirements of the chemical industry.

	ATX JBEP and ECEP Series Undrilled Fiberglass Reinforced Polyester Enclosures Appleton's ATX JBEP and ECEP Series undrilled fiberglass reinforced polyester enclosures are designed for use in Zone 1 or 2 areas, where flammable gases or vapors are present either continuously or intermittently

	ATX JBES Series Pre-Drilled 316L Stainless Steel Junction Boxes Appleton's ATX JBES Series 316L stainless steel enclosures are factory drilled, equipped with terminals and designed for use in Zone 1 or 2 areas where flammable gases or vapors are present

	Automation Transformers Non-Ventilated 50 VA to 45 kVA SolaHD’s non-ventilated automation transformers are used in hazardous and harsh industrial environments. Encapsulation and rugged NEMA 3R enclosure protect the transformer from dust and moisture while providing extra shock and vibration resistance

	D2P - EWP Factory Sealed Circuit Breaker Panelboards Appleton's D2P and EWP factory sealed circuit breaker panelboards provide control and protection of electrical equipment in wet, corrosive and hazardous environments as well as control and protection of lighting, heat tracing and other circuits

	EFD, EFDB and EDS Series Factory Sealed Control Stations and Pilot Lights Appleton’s EFD, EFDB and EDS Series factory sealed control stations and pilot lights are suitable for use in areas where flammable vapors, gases or highly combustible dusts may be present

	FM7 Unilet Conduit Outlet Bodies Appleton FM7 Unilet conduit outlet bodies serve as pulling fittings, make bends in conduit system, provide openings for splicing, connect and change direction of conduit runs, allow connections for branch runs, permit access to conductors for maintenance

	FM9 Unilet Conduit Outlet Bodies Appleton FM9 Unilet conduit outlet bodies serve as pulling fittings, make bends in conduit system, provide openings for splicing, connect and change direction of conduit runs, allow connections for branch runs, permit access to conductors for maintenance

	GRU Conduit Outlet Boxes with Union Hubs Appleton's GRU conduit outlet boxes with union hubs are explosionproof, facilitate pulling of wires and provide access for maintenance

	GRU Universal Conduit Outlet Boxes Appleton GRU universal conduit outlet boxes provide general purpose wiring, facilitate pulling of wires and access for maintenance

	Mercmaster III HID 50-250 Watt Luminaires Appleton's Mercmaster III 50-250 enclosed and gasketed luminaires for hazardous and wet locations are available in 50 to 250 Watt, HPS, PSMH, MH lamp types. Suitable for Class I, Division 2, Class I, Zone 2, Class II, Division 1 and 2, Class III locations

	SJB Series 316L Stainless Steel Junction Boxes Appleton’s ATX Series SJB 316L Stainless Steel Junction Boxes, Designed for use in Class I, Zone 1 areas, where flammable gases or vapors are present either continuously or intermittently

	T3 Series Nickel Plated Brass Cable Glands Appleton’s T3 Series nickel plated brass cable glands are designed for use with for armored cables

	TC Cable Connector Appleton TC Series cable connectors are designed for use with Type TC tray cable in ordinary, wet and hazardous locations

	UNY, UNF and UNL Unions Appleton UNY unions connect conduit to enclosure, UNF unions connect conduit to conduit, and UNL unions connect conduit to enclosure at 90 degree angle

RSS News Feeds

Please Select

CONSIDER IT SOLVED.