|
|
Whatever your needs for hazardous location switches and controls, EGS Electrical Group has you covered. We offer factory sealed models that simplify installation by eliminating the need to install external sealing fittings. We offer Contender® models that interchange with competitor’s bodies and boxes so you can upgrade features and reliability without replacing the entire electrical infrastructure. We offer NEMA 4X enclosures, ATEX/IEC and CSA Certified models, pre-drilled and customized control stations, and much more – all designed and built to the high standards of quality you expect only from EGS Electrical Group.
 | Appleton’s explosionproof ACSEW cast control centers are for use in classified areas where hazardous materials are handled or stored, an ideal choice for centralizing all controls in one area or for making full use of limited space
| |
 | Appleton’s ATX D Series aluminum control stations are for use in hazardous areas, for local control of electrical equipment in power plants, chemical and petrochemical plants, petroleum refineries and other industrial applications
| |
 | Appleton’s ATX FAS Series Break Glass Call Points are for use in hazardous areas where ignitable vapors, gases or highly combustible dusts are present, such as chemical and petrochemical plants, refineries and other process industries
| |
 | Appleton’s ATX FU40 Series fuse carrier can be used for back-up or main fuse protection for hazardous locations. It can be fitted inside Increased Safety Ex e enclosures
| |
 | Appleton’s ATX RSI Series relays are available as single channel relays for installation in a safe (NIS) area or Exd box, two channel relays for installation in a safe (NIS) area or intrinsic safety terminals for use in a hazardous (IS) area | |
 | Appleton’s Contender series factory sealed control stations and pilot lights are for use in classified areas where ignitable vapors, gases or highly combustible dusts are present, suitable for locations where corrosive elements are present | |
 | Appleton’s Contender series factory sealed front operated tumbler switches are designed to prevent arcing of enclosed switches in ignitable atmospheres during on-off switching of lighting and light power loads
| |
 | Appleton’s Division 2 Contender factory sealed control stations and pilot lights are suitable for use in highly corrosive areas, washdown areas and other damp or wet areas
| |
 | Appleton’s ECS Series control stations are used in conjunction with contactors and magnetic starters to provide circuit selection and control for motors. Pilot lights provide visual confirmation that an electrical function is being performed | |
 | Appleton’s ECS Control Stations are used in conjunction with contactors and magnetic starters to provide circuit selection and control for motors, pilot lights provide visual confirmation that an electrical function is being performed | |
 | Appleton’s ECS Series timer control stations provide timed operation of electrical circuits for lighting, small pumps, heat tracing, etc. | |
 | Appleton’s EFD, EFDB and EDS Series factory sealed control stations and pilot lights are suitable for use in settings where flammable vapors, gases or highly combustible dusts may be present | |
 | Appleton’s EFD, EFDB and EDS Series factory sealed control stations and pilot lights are suitable for use in areas where flammable vapors, gases or highly combustible dusts may be present | |
 | Appleton’s EFS Series non-sealed tumbler switches are designed to prevent arcing of enclosed switches in ignitable atmospheres during on-off switching of lighting and light power loads | |
 | Appleton’s explosionproof GUSC heavy duty tumbler switches are for use in classified areas where hazardous materials are handled or stored, control of motors and other apparatus | |
 | Appleton’s Intraground N1 and N2 Series control stations feature push buttons and selector switches that are used in conjunction with contactors and magnetic starters to provide circuit selection and control for motors
| |
 | Appleton’s Intraground N1 Series nonmetallic tumbler switches are designed to prevent arcing of enclosed switches in ignitable atmospheres during on-off switching of lighting and light power loads | |
 | O-Z Gedney explosionproof NCSEW cast control centers allow the grouping of push buttons, switches and pilot devices in one enclosure to satisfy a wide range of control applications in classified areas.
| |
 | Nutsteel's explosionproof NEBAM ammeters are for measuring AC or DC current. They can be used in classified areas where hazardous materials are handled or stored
| |
 | Nutsteel's explosionproof, increased safety NEBC Series control stations provide emergency signaling and control in Zone 1 and 2, Group IIC locations | |
 | Nutsteel's explosionproof NEBVO Series voltmeters are for measuring AC or DC current. They are for use in classified areas where hazardous materials are handled or stored
| |
 | Nutsteel's explosionproof NECCS control panels with operators and pilot lights are for use in classified areas where hazardous materials are handled or stored, for centralizing all controls in one area or for making full use of limited space | |
 | Nutsteel's NEPTE NEPTL NECM Series single, double and triple control stations are available with or without equipment and covers, explosionproof for use in classified areas where hazardous materials are handled or stored | |
 | Nutsteel's NTBT Series control switches and break glass call points can be used on exit routes for control of motorized equipment. They are corrosion resistant for use in non-hazardous location | |
 | O-Z Gedney's Optitrol Series control stations, pilot lights, push buttons and selector switches are used in conjunction with contactors or magnetic starters for remote control of motors to provide circuit control and-or selection
| |
 | Appleton’s ATX Unicode 2 Series accessories are designed for use with Unicode 2 control stations. They offer local control in power, reverse-osmosis, chemical and petrochemical plants, petroleum refineries, pulp and paper processing plants, etc | |
 | Appleton’s ATX Unicode 2 Series control stations and switches offer a broad range of push buttons and selector switches which are used in conjunction with contactors and magnetic starters to provide circuit selection and control in hazardous areas | |
 | Appleton’s ATX Unicode 2 Series customized control stations offer a broad range of push buttons and selector switches which are used in conjunction with contactors and magnetic starters to provide circuit selection and control in hazardous areas | |
 | Appleton's ATX Unicode 2 Series polyamide control stations, push buttons and selector switches are used in conjunction with contactors and magnetic starters to provide circuit selection and control for motors | |
 | Appleton's ATX Unicode 2 Series Pre-Drilled Control Stations provide local control and motor control in power plants, chemical and petrochemical plants, petroleum refineries, pulp and paper processing plants, and many other industrial settings
| |
 | Appleton’s UniCode Series factory sealed control stations, pilot lights, push buttons and selector switches are used in conjunction with contactors and magnetic starters to provide circuit selection and control for motors | |
|
|
|
|
|
